1.Engine/Motor
| Picture | Order-Nr. | Description | Bezeichnung | Euro |
| 9-39+10-39 | set cylinderheads alu, high comp. | Alu-Zylinderköpfe 6:1, Paar | 320,00 | |
| 9-40 + 10-40 | set cylinderheads alu, 5:1 | Alu-Zylinderköpfe, vorne 5:1 | 460,00 | |
| 9-40 | head, front cilinder alu 5:1 | Alu-Zylinderkopf, vorne 5:1 | 250,00 | |
| 10-40 | head, rear cilinder alu 5:1 | Alu-Zylinderkopf, hinten 5:1 | 250,00 | |
| 11-39C | headgasket, copper 750cc | Zylinderkopfdichtung, Kupfer WL | 12,00 | |
| 11-36A | headgasket, copper 1200cc | Zylinderkopfdichtung,Kupfer, UL 1936-48 | 13,50 | |
| 11-36AT | headgasket, blue teflon 1200cc | Zylinderkopfdichtung,Teflon, UL 1936-48 | 11,50 | |
| 14-26 | stud, iron heads | Stehbolzen für Eisenköpfe | 4,50 | |
| 14-40 | bolt, cilinderhead, short, cad. | Kopfschraube, kurz, cadmiert | 7,00 | |
| 14-40B | bolt, cilinderhead, short, black | Kopfschraube, kurz, schwarz | 6,00 | |
| 14-40A | bolt, cilinderhead, long, cad. | Kopfschraube, lang, cadmiert | 7,00 | |
| 14-40AB | bolt, cilinderhead, long, black | Kopfschraube, lang, schwarz | 6,00 | |
| WL1-1 | set, cilinderheadbolts (16), cad | Kopfschraubenset (16), Zink | 90,00 | |
| WL1-2 | set, cilinderheadbolts (16), chrome | Kopfschraubenset (16), Chrom | 137,50 | |
| WL1-18 | set, cilinderheadbolts (16), black | Kopfschraubenset (16), Schwarz | 90,00 | |
| WL1-3 | set,headbolts cad iron heads BT | Kopfschrauben,BT,Eisenköpfe | 145,00 | |
| WL1-4 | set,headbolts cad alum. heads BT | Kopfschrauben,BT,Aluköpfe | 95,00 | |
| 15-39 | washerset, cad(16) | Unterlegscheibenset Zink | 38,00 | |
| 15-39C | washerset, chrome (16) | Unterlegscheibenset Chrom | 64,00 | |
| 15-39P | washerset, park(16) | Unterlegscheibenset brüniert | 36,00 | |
| 15-39BT | washerset, cad, BT aluheads | Unterlegscheibenset, Zink BT Aluköpfe | 41,00 | |
| 0232 | washer f. long headbolts | U-Scheibe f. Kopfschraube lang | 1,00 | |
| 0232P | washer f. long headbolts, park | U-Scheibe f. Kopfschraube brüniert | 1,00 | |
| 0232C | washer f. long headbolts,chrome | U-Scheibe f. Kopfschraube Chrom | 1,20 | |
| 15-26 | nuts, ironheads (16) + washer | Muttern f. Gußköpfe (16) + Scheiben | 62,00 | |
| 29-29 | stud, cilinder base | Stehbolzen Zylinderfuß | 4,00 | |
| 37-09C | sparkplug Champion D16 | Zündkerze Champion D16 | 7,00 | |
| 37-09D | sparkplug Champion D14 | Zündkerze Champion D14 | 7,00 | |
| 37-09D/NGK | sparkplug NGK A-7 | Zündkerze NGK A-7 | 5,00 | |
| 46-29 | gasket, cilinderbase | Zylinderfußdichtung | 1,50 | |
| 0123 | nut, cilinderbase cad | Mutter, Zylinderfuß zink | 2,10 | |
| 0123P | nut, cilinderbase park | Mutter, Zylinderfuß brüniert | 2,10 | |
| 0123C | nut, cilinderbase chrom | Mutter, Zylinderfuß Chrom | 3,00 | |
| 0123HC | nut, cilinderbase chrome acorn | Hutmutter, Zylinderfuß Chrom | 3,00 | |
| 53-40 | gasket-set,engine | Dichtsatz Motor | 55,00 | |
| 55-40 | gasket-set,top overhaul, NOS | Dichtsatz , Top End, Original | 21,00 | |
| 163-32 | valve,inlet | Einlaßventil | 27,00 | |
| 163-32OS | valve,inlet,oversize 1/8" | Einlaßventil, Übermaß WR/WLDR | 27,00 | |
| 165-32 | valve,exaust | Auslaßventil | 27,00 | |
| 163-37 | Valve,intake UL | Ventil, Einlaß BT-UL | 31,00 | |
| 165-37 | Valve,exaust UL | Ventil, Auslaß BT-UL | 31,00 | |
| 166-32 | valveguide WL 750cc 1932-40 | Ventilführung WL 750cc 1932-40 | 23,00 | |
| 166-41 | valveguide WL 750cc 1941-up | Ventilführung WL 750cc ab 1941 | 17,00 | |
| 166-30 | valveguide VL/UL | Ventilführung VL/UL | 22,00 | |
| 166-30OS | valveguide VL/UL Oversize | Ventilführung VL/UL Übermaß | 24,00 | |
| 167-38 | seal,valveguide (top) | Dichtung, Ventilführung | 0,90 | |
| 168-41 | spring,valve 41-up | Ventilfeder ab 41' | 8,00 | |
| 168-41N | spring,valve 41-up NOS | Ventilfeder ab 41' Original | 7,00 | |
| 168-32 | spring,valve 32-40 | Ventilfeder 32-40' | 7,00 | |
| 168-30B | spring,valve UL | Ventilfeder UL | 8,00 | |
| 170-30 | collar,valvespring | Ventilteller | 5,00 | |
| 171-30 | collar,valvespring, UL | Ventilteller, UL | 5,00 | |
| 170-30A | collar,valvespring, UL, upper | Federhalter, UL , oben | 5,00 | |
| 171-37 | spacer upper valve collar, UL | Distanzstück, UL | 4,00 | |
| 172-30 | key,collar | Keil, Ventilteller | 1,75 | |
| 173-39A | upper corkseal UL 39-up set 4 | Korkdichtung, oben UL ab 1939 (4) | 12,00 | |
| 173-39C | spring, valve cover UL set of 4 | Federn, Ventilcover, UL (4) | 20,00 | |
| 175-39A | lower corkseal UL 39-up set 4 | Korkdichtung, unten UL ab 1939 (4) | 12,00 | |
| 175-39C | lower seal UL 39-up set 4 | Dichtung, unten UL ab 1939 (4) | 8,50 | |
| WL1-5 | coverset, cad | Stößelcoverset, Zink | 95,00 | |
| WL1-6 | coverset, chrome | Stößelcoverset, Chrom | 119,00 | |
| WL1-25 | coverset, park army WLA | Stößelcoverset, brüniert, WLA | 88,00 | |
| WL1-32 | coverset, chrome 1931-1937 | Stößelcoverset, Chrom, 1931-1937 | 109,00 | |
| WL1-7 | coverset, O-ring, cad | Cover-Set mit O-Ringen | 95,00 | |
| WL1-31 | coverset, O-ring, park | Cover-Set mit O-Ringen, brüniert | 100,00 | |
| WL1-8 | coverset, O-ring, chrome | Cover-Set mit O-Ringen, Chrom | 125,00 | |
| WL1-19 | coverset, WR, cad | Cover-Set, WR, verzinkt | 99,00 | |
| 175-29 | rubber,valvecover | Stößelcoverdichtung "oben" | 1,80 | |
| 11123 | O-ring,valvecover | Stößelcoverdichtung, O-Ring | 1,00 | |
| 176-26 | gasket,valvecover | Stößelcoverdichtung "unten" | 1,00 | |
| 185-41M | spacer , short valve spring use | Distanzstück f. kurze Ventilfedern | 4,00 | |
| 200-40 | tappet , STD. | Stößel , STD | 95,00 | |
| 200-40+5 | tappet, +.005 oversize | Stößel, +.005, übermaß | 95,00 | |
| 208-29etc. | tappetrollerkit (4) | Rollenlager-Set f. Stößel (4) | 45,00 | |
| 221-40 | adjustingscrew , tappet | Stößeleinstellschraube | 5,00 | |
| 223-38 | nut,adj-screw | Mutter f. Stößeleinstellschraube | 2,30 | |
| 234-30 | guide,fronttappet | Stößelführung, vorne | 39,50 | |
| 235-30 | guide,rearttappet | Stößelführung, hinten | 39,50 | |
| 237-30 | gasket, tappetguide | Dichtung, Stößelführung | 1,50 | |
| 057 | screw,tappetguide ,cad. | Schraube f. Stößelführung Zink | 2,50 | |
| 057P | screw,tappetguide ,park | Schraube f. Stößelführung Brüniert | 2,50 | |
| 057C | screw,tappetguide chr. | Schraube f. Stößelführung Chrom | 3,50 | |
| 253-29A | piston cmpt. with rings, std NOS | Kolben+Ringe+Kolbenbolzen, STD orig. | 47,00 | |
| 253-29C | piston cmpt. with rings, +.005 NOS | Kolben+Ringe+Kolbenbolzen, +.005 orig. | 42,00 | |
| 253-29D | piston cmpt. with rings, +.010 NOS | Kolben+Ringe+Kolbenbolzen, +.010 orig. | 40,00 | |
| 253-29E | piston cmpt with rings, +.020 | Kolben+Ringe+Kolbenbolzen, +.020 | 60,00 | |
| 253-29FN | piston cmpt. with rings, +.030 NOS | Kolben+Ringe+Kolbenbolzen, +.030 orig. | 50,00 | |
| 253-29F | piston cmpt. with rings, +.030 | Kolben+Ringe+Kolbenbolzen, +.030 | 60,00 | |
| 253-29G | piston cmpt. with rings, +.040 | Kolben+Ringe+Kolbenbolzen, +.040 | 60,00 | |
| 253-29H | piston cmpt. with rings, +.050 | Kolben+Ringe+Kolbenbolzen, +.050 | 60,00 | |
| 253-29JA | piston cmpt. with rings, +.060 | Kolben+Ringe+Kolbenbolzen, +.060 | 85,00 | |
| 253-29KA | piston cmpt. with rings, +.070 | Kolben+Ringe+Kolbenbolzen, +.070 | 90,00 | |
| 253-29MA | piston cmpt with rings, +.080 | Kolben+Ringe+Kolbenbolzen, +.080 | 90,00 | |
| 253-29NA | piston cmpt with rings, +.090 | Kolben+Ringe+Kolbenbolzen, +.090 | 98,00 | |
| 253-29R | piston cmpt with rings, +.100 | Kolben+Ringe+Kolbenbolzen, +.100 | 90,00 | |
| 261-38 | ringset, piston (6) STD | Kolbenringe (6), STD | 17,00 | |
| 261-38D | ringset, piston (6) +.010" | Kolbenringe (6), +.010" | 17,00 | |
| 261-38E | ringset, piston (6) +.020" | Kolbenringe (6), +.020" | 17,00 | |
| 261-38F | ringset, piston (6) +.030" | Kolbenringe (6), +.030" | 17,00 | |
| 261-38G | ringset, piston (6) +.040" | Kolbenringe (6), +.040" | 17,00 | |
| 261-38HAST | Hasting rings f. orig type pistons | Hastings-Ringe f. Original-Style Kolben | 45,00 | |
| 256-37 | piston UL 1200CC, (set of 2) | Kolbenpaar UL 1200 (größe angeben ! ) | 230,00 | |
| 256-30B | piston UL 1340CC, (set of 2) | Kolbenpaar UL 1340 (größe angeben ! ) | 270,00 | |
| 275-32X | pistonpin oversize NOS | Kolbenbolzen, Übermaß Original | 6,00 | |
| 280-32 | lockring , pistonpin | Kolbenbolzen-Sicherungsring | 2,20 | |
| 280-32N | lockring , pistonpin, NOS | Kolbenbolzen-Sicherungsring, Original | 8,00 | |
| RRS | rod race set (3) WL/WLA | Pleuellagerschalen set (3) WL/WLA | 36,00 | |
| 290-37 | rod - set,cmpt, UL | Pleuel-Set, komplett UL | 320,00 | |
| 293-36 | bushing , pistonpin | Pleuel-Augenbuchse | 7,00 | |
| 293-36/+5 | bushing , pistonpin, +.005" oversize | Pleuel-Augenbuchse, +.005" übermaß | 6,00 | |
| 301-29 | retainer , crankpin roller | Pleuel-Lagerkäfig | 13,50 | |
| 304-15 | roller,left std | Rolle, STD. | 0,60 | |
| 304-15D | roller,left+.0002 | Rolle, .0002" | 0,60 | |
| 304-15F | roller,left+.0004 | Rolle, .0004" | 0,60 | |
| 304-15H | roller,left+.0006 | Rolle, .0006" | 0,60 | |
| 304-15KA | roller,left+.0008 | Rolle, .0008" | 0,60 | |
| 304-15MA | roller,left+.001 | Rolle, .001" | 0,60 | |
| 305-29 | roller,right std | Rolle, STD. | 0,60 | |
| 305-29D | roller,right +.0002 | Rolle, .0002" | 0,60 | |
| 305-29F | roller,right +.0004 | Rolle, .0004" | 0,60 | |
| 305-29H | roller,right +.0006 | Rolle, .0006" | 0,60 | |
| 305-29KA | roller,right +.0008 | Rolle, .0008" | 0,60 | |
| 305-29MA | roller,right +.001 | Rolle, .001" | 0,60 | |
| 2289-17 | roller, short std | Rolle, STD | 0,50 | |
| 2289-17D | roller, short +.0002 | Rolle, +.0002 | 0,50 | |
| 2289-17F | roller, short +.0004 | Rolle, +.0004 | 0,50 | |
| 2289-17H | roller, short +.0006 | Rolle, +.0006 | 0,50 | |
| 2289-17KA | roller, short +.0008 | Rolle, +.0008 | 0,50 | |
| 2289-17MA | roller, short +.001 | Rolle, +.001 | 0,50 | |
| 348-29-3 | crankpin , 3-hole | Hubzapfen, 3-Loch | 57,00 | |
| 348-29OS | crankpin , 3-hole oversize | Hubzapfen, 3-Loch, Übermaß | 55,00 | |
| 348-29J | crankpin , (JIMS, USA) | Hubzapfen, (JIMS, USA) | 149,00 | |
| 352-29 | sprocketshaft | Kurbelwellenschaft, links | 58,00 | |
| 352-29J | sprocketshaft (JIMS, USA) | Kurbelwellenschaft, li. (JIMS, USA) | 125,00 | |
| 355-37 | gearshaft | Kurbelwellenschaft, rechts | 69,00 | |
| 355-37J | gearshaft, (JIMS, USA) | Kurbelwellenschaft, re. (JIMS, USA) | 210,00 | |
| 355-37B | spring, sealring | Feder | 2,00 | |
| 355-39 | ring, bearing seal | Ring, Lagerabdeckung | 12,00 | |
| 356-37B | spring, sealring, UL | Feder, UL | 2,60 | |
| 357-26A | collarset trust | Distanzscheibenset | 60,00 | |
| 357-26? | collar, each | Distanzscheibe einzeln | 6,50 | |
| 357-26X | collar, oversize 0.106" | Scheibe, Übermaß 0.106" | 6,00 | |
| 357-26XX | collar, oversize 0.110" | Scheibe, Übermaß 0.110" | 6,00 | |
| 358-36 | bearing spacer, UL | Distanzscheibe Lager, UL | 5,00 | |
| 1650-18 | key, crankpin | Keil, Hubzapfen | 0,80 | |
| 361-12 | key, sprocket/gearshaft | Keil | 4,00 | |
| 364-29 | nut, shafts | Mutter,Kurbelwellenschaft | 6,50 | |
| 364-37 | nut, crankpin | Mutter, Hubzapfen | 6,00 | |
| 368-12 | lockwasher, crankpin | Sicherungsblech, Hubzapfen | 2,00 | |
| 368-29 | lockwasher, shafts | Sicherungsblech, Schaft | 1,50 | |
| 030 | screw, lock | Schraube, Sicherungsblech | 0,50 | |
| 372-21 | washerset, flywheel (2) | Pleuel-Anlaufscheibenset | 19,50 | |
| 372-21B | washerset, flywheel (2), +.005" | Pleuel-Anlaufscheibenset, +.005" | 16,00 | |
| 411-37 | strainer, crankcase | Ölsieb | 6,00 | |
| 411-37A | pin, strainer | Sicherungsstift, Ölsieb | 0,80 | |
| 413-39A | bushing, right roller bearing | Lagerschale, rechts | 50,00 | |
| 413-39AN | bushing, right roller bearing NOS | Lagerschale, rechts, Original | 60,00 | |
| 414-37 | right bearing cmpt, Std. | Lager, komplett rechts, STD | 25,00 | |
| 414-37D | right bearing cmpt, +.0002" | Lager, komplett rechts, +.0002" | 25,00 | |
| 414-37E | right bearing cmpt, +.0004" | Lager, komplett rechts, +.0004" | 25,00 | |
| 414-37H | right bearing cmpt, +.0006" | Lager, komplett rechts, +.0006" | 25,00 | |
| 414-37KA | right bearing cmpt, +.0008" | Lager, komplett rechts, +.0008" | 25,00 | |
| 414-37MA | right bearing cmpt, +.0010" | Lager, komplett rechts, +.0010" | 25,00 | |
| 414-39A | washer, right roller bearing WL | Anlaufscheibe, rechts WL | 4,50 | |
| 414-40 | washer, right roller bearing BT | Anlaufscheibe, rechts BT | 4,50 | |
| 415-37 | retainer, right roller bearing | Lagerkäfig, rechts | 10,50 | |
| 416-39 | bushing,left | Lagerschale,links | 48,00 | |
| 416-39N | bushing,left, NOS | Lagerschale,links, original | 44,00 | |
| 417-29 | retainer, left roller bearing | Lagerkäfig, links | 22,00 | |
| 421-39 | end left bearing | Dichtring, Orig.-Style | 10,50 | |
| 421-39S | oilseal kit, special (421-39) | Simmerring, Kit ersetzt 421-39 | 28,00 | |
| 421-40 | oilseal kit, UL / Knuckle | Simmerring, Kit UL / Knuckle | 28,00 | |
| 422-39 | washer, left bearing, WL | Anlaufscheibe, links, WL | 4,00 | |
| 422-40 | washer, left bearing, BT | Anlaufscheibe, links, BT | 5,00 | |
| 423-39 | ring, bearing spring, WL | Sprengring, WL | 1,50 | |
| 423-40 | ring, bearing spring, BT | Sprengring, BT | 1,20 | |
| WL1-9 | mountset, engine | Montage-kit, Motor | 12,00 | |
| WL1-27 | mountset, engine, original style | Montage-kit, Motor, Original style | 25,00 | |
| WL1-30 | mountset, engine, original style,park | Montage-kit, Motor, Original style, brüniert | 25,00 | |
| 437-26 | bolt, motor fastening | Motorhalteschraube | 4,00 | |
| 0128 | nut, motor fastening | Mutter | 3,60 | |
| 0224 | washer, motorbolt | Unterlegscheibe | 0,50 | |
| WL1-10 | set crankcase studs, bolts, nuts | Gehäusebolzen-Set, kpl. Zink | 52,00 | |
| WL1-26 | set crankcase studs, etc. park | Gehäusebolzen-Set, kpl. Brüniert | 52,00 | |
| 442-10 | stud, crankcase 1 5/8 " | Gehäusebolzen, 1 5/8" | 4,00 | |
| 442-37 | stud, crankcase 4 1/2 " | Gehäusebolzen, 4 1/2" | 4,50 | |
| 443-37 | bolt, crankcase | Gehäuseschraube | 1,60 | |
| 444-37 | stud, crankcase 5 " | Gehäusebolzen 5" | 4,50 | |
| 451-37 | nut, crankcasestud | Mutter f. Gehäusebolzen | 1,70 | |
| 451-37P | nut, crankcasestud, park | Mutter f. Gehäusebolzen, brüniert | 1,70 | |
| 451-37C | nut, crankcasestud, chrome | Mutter f. Gehäusebolzen, chrom | 1,40 | |
| 453-11 | plug, crankcase drain | Ölablaßschraube | 4,00 | |
| 480-38 | switch, oil pressure, Flathead | Öldruckschalter, Flathead | 27,00 | |
| 480-36 | switch, oil pressure, Knuckle | Öldruckschalter, Knucklehead | 32,00 | |
| 503-37 | shaft, scavengerpump | Schaft, Rückförderpumpe | 30,00 | |
| 504-37 | valve, gear breather | Flatterventil | 10,50 | |
| 504-39 | screen, scavengerpump | Sieb, Rückförderpumpe | 4,50 | |
| 543-37 | pipe relief | Motorentlüftung | 14,50 | |
| 543-37A | pipe, front chain oiler | Primäröler | 4,25 | |
| 544-37 | gasket, relief pipe | Dichtung, Motorentlüftung | 1,40 | |
| 036 | screw, relief pipe | Schraube, Motorentlüftung | 0,70 | |
| 584-37 | gearcover, U/UL 1937-39 plain | Steuerdeckel, U/UL 1937-39 glatt | 830,00 | |
| 584-40 | gearcover, U/UL 1940-48 ripped | Steuerdeckel, U/UL 1940-48 gerippt | 830,00 | |
| 585-37 | ring, oilseal | Federhalteblech | 16,50 | |
| 585-37N | ring, oilseal, NOS | Federhalteblech, Original | 25,00 | |
| 585-37A | spring, sealring | Feder | 2,20 | |
| 585-37B | pin, sealring retaining | Pin | 2,50 | |
| 587-37 | oilfeedpump | Hinförderpumpe | 330,00 | |
| WL1-11 | repairoilnipple for oilpump | Reparaturstück, Konus | 9,00 | |
| 589-37 | gasket, oilfeedpump | Dichtung, Hinförderpumpe | 1,50 | |
| 590-37 | gasket, scavengerpump | Dichtung, Rückförderpumpe | 1,20 | |
| 591-36 | stud, oilermounting 1 11/16 | Stehbolzen, Ölpumpe 1 11/16" | 4,00 | |
| 591-37 | stud, oilermounting 1 11/32 | Stehbolzen, Ölpumpe 1 11/32" | 4,00 | |
| 591-41 | nut, oilmountingstud cad. | Mutter, Ölpumpe, kurz, cadmiert | 2,50 | |
| 591-41P | nut, oilmountingstud park | Mutter, Ölpumpe, kurz, brüniert | 3,50 | |
| 591-41C | nut, oilmountingstud chr. | Mutter, Ölpumpe, kurz, Chrom | 3,50 | |
| 591-41A | nut, oilmountingstud long cad | Mutter, Ölpumpe, lang, cadmiert | 2,90 | |
| 591-41AP | nut, oilmountingstud long park | Mutter, Ölpumpe, lang, brüniert | 2,50 | |
| 591-41AC | nut, oilmountingstud long chr. | Mutter, Ölpumpe, lang, Chrom | 3,50 | |
| 0108 | nut, scavengerpump | Mutter, Rückförderpumpe | 1,20 | |
| 0108P | nut, scavengerpump park | Mutter, Rückförderpumpe brüniert | 0,80 | |
| 0108C | nut, scavengerpump chr. | Mutter, Rückförderpumpe Chr. | 1,40 | |
| 13332-25A | bolt, feedpump cad | Schraube, Hinförderpumpe | 4,50 | |
| 13332-25C | bolt, feedpump chrome | Schraube, Hinförderp. Chr. | 6,00 | |
| 0109 | nut, 1/4 - 24 UNS, zinc | Mutter, Zink | 1,60 | |
| 0109P | nut, 1/4 - 24 UNS, park | Mutter, brüniert | 1,60 | |
| 0109C | nut, 1/4 - 24 UNS, chrome | Mutter, Chrom | 2,00 | |
| 598-37 | gasket, gearcover, UL | Dichtung, Steuerdeckel, UL | 6,00 | |
| 598-37A | gasket, gearcover, WL | Dichtung, Steuerdeckel, WL | 6,00 | |
| 056 | screw, gearcover cad. | Schraube, Steuerdeckel, Zink | 2,20 | |
| 056C | screw, gearcover chr | Schraube, Steuerdeckel, Chrom | 2,90 | |
| 056P | screw, gearcover park | Schraube, Steuerdeckel, Brüniert | 2,40 | |
| 604-37A | gear, pinion | Antriebsrad, Kurbelwelle | 39,50 | |
| WL1-24 | set camgears WL/WLA (4) | Nockenwellen-Set, WL/WLA (4) | 475,00 | |
| WL1-12 | camgearshafts, set of 4 | Schäfte f. Nockenwellen, Set (4) | 99,00 | |
| WL1-13 | set camgears WLDR | Nockenwellen-Set, WLDR | 475,00 | |
| WL1-33 | set camgears WLDR w. extra lift | Nockenwellen-Set, WLDR schärfer | 500,00 | |
| 610-37A | set camgears 1200cc UL | Nockenwellen-Set, 1200er UL | 500,00 | |
| 612-37A | camgear UL front exaust | Nockenwelle UL auslaß, vorne | 125,00 | |
| 613-37A | camgear UL rear exaust | Nockenwelle UL auslaß, hinten | 125,00 | |
| 619-37 | gear, idling, NOS | Zahnrad, original | 39,00 | |
| 619-37us | gear, idling, used | Zahnrad, gebraucht | 19,00 | |
| 620-30 | bushing, idlinggear | Buchse, Zahnrad | 14,50 | |
| 621-37 | gear, timerdrive | Antriebsritzel, Zündverteiler | 17,00 | |
| 1654-29 | key, timerdrive gear | Keil für Antriebsritzel | 3,00 | |
| 632-37 | gear, generator drive | Zahnrad, Lichtmaschine | 45,00 | |
| 634-32 | pin, generator gear | Sicherungsstift f. 632-37 | 0,95 | |
| 636-30 | stud, idling gear | Schaft, Zahnrad | 8,50 | |
| 644-30 | screw, idling stud | Schraube, Schaft | 3,25 | |
| 462-11 | shim, idling gear | Papierscheibe | 0,70 | |
| 658-15 | ring, gearstudspring | Sprengring | 0,90 | |
| 660-37 | bushing, gearcover | Nockenwellenbuchse, im Deckel | 15,00 | |
| 660-37A | bushing, gearcover | Nockenwellenbuchse, im Deckel | 15,00 | |
| 660-37B | bushing, gearcover | Nockenwellenbuchse, im Deckel | 15,00 | |
| 660-37C | bushing, gearcover | Nockenwellenbuchse, im Deckel | 15,00 | |
| 660-37D | bushing, pinionshaft UL | Kurbelwellenbuchse, im Deckel UL | 22,00 | |
| 660-37E | bushing, pinionshaft 750cc | Kurbelwellenbuchse, im Deckel 750er | 16,00 | |
| 661-31 | pin, coverbushing | Sicherungspin | 0,50 | |
| 661-37A | bushing, camgear | Nockenwellenbuchse, im Gehäuse | 14,00 | |
| 664-37 | washer, camgearshaft .007" | Anlaufscheibe, Nockenwelle .007" | 0,80 | |
| 664-37C | washer, camgearshaft .005" | Anlaufscheibe, Nockenwelle .005" | 0,80 | |
| 664-37R | washer, camgearshaft .015" | Anlaufscheibe, Nockenwelle .015" | 1,00 | |
| 672-32 | screw, chainoiler adj. | Einstellschraube, Kettenölung | 3,50 | |
| 63610-70 | screw, chainoiler adj. late type NOS | Einstellschraube, späte Ausführung , Orig. | 3,50 | |
| 674-32 | washer, .002" adj. screw | Unterlegscheibe f. 672-32 | 0,40 | |
| 678-41 | body, feedpump | Gehäuse, Förderpumpe | 260,00 | |
| 7223-34 | bolt, scavengerpump | Schraube, Rückförderpumpe | 2,20 | |
| 687-41 | holder, feedpump vane | Halter f. Ölmitnehmer | 45,00 | |
| 687-37 | holder, vane, flat type | Halter f. Ölmitnehmer, flache pumpe | 38,00 | |
| 688-37 | vane, feedpump set of 2 | Ölmitnehmer (2) | 23,00 | |
| 689-37 | spring, feedpump vane | Feder f. Ölmitnehmer | 2,00 | |
| 689-37B | gear, breathervalve | Antriebsrad f. Rückförderpumpe | 59,00 | |
| 690-38 | gear, scavengerpump | Zahnrad, Rückförderpumpe | 19,00 | |
| 691-37 | gear, scavengerpump idle | Zahnrad, Rückförderpumpe | 20,00 | |
| 693-36 | key, oilfeedgear | Keil f. 690-38 | 1,90 | |
| 694-37 | halfmoonwasher, scav.-pump | Halbmondkeil, Rückförderpumpe | 2,00 | |
| 697-37 | shaft, scav. idle gear | Stift, Zahnrad | 2,00 | |
| 701-36 | screw, valve spring cover | Verschlußschraube | 4,25 | |
| 701-36C | screw, cover, chrome | Verschlußschraube, Chrom | 6,00 | |
| 703-36 | spring, checkvalve | Feder | 1,80 | |
| 704-36 | ball, checkvalve | Kugel | 0,50 | |
| 707-36 | screw, by-pass valvecover | Verschlußschraube | 4,25 | |
| 707-36C | screw, valvecover, chrome | Verschlußschraube, Chrom | 5,50 | |
| 711-41 | screw, by-pass adjusting | Einstellschraube | 6,00 | |
| 713-41 | spring, by-pass valve | Feder | 2,00 | |
| 2326-38 | plug, timinghole | Verschlußschraube | 5,50 | |
| 2326-38C | plug, timinghole chrome | Verschlußschraube, Chrom | 7,50 |